System Administrator 2026 — Test 36

Correct Answer: C. C. Optical fiber
Explanation: Fiber optics is considered to have the highest transmission speed among the all mentioned above. The fiber optics transmission runs at 1000Mb/s. It is called as 1000Base-Lx whereas IEEE standard for it is 802.3z. It is popularly used for modern day network connections due to its high transmission rate.

Correct Answer: A. A. Digital modulation
Explanation: In analog modulation, digital low frequency baseband signal (digital bit stream) is transmitted over a higher frequency. Whereas in digital modulation the only difference is that the base band signal is of discrete amplitude level. The bits are represented by only two frequency levels, one for high and one for low.

Correct Answer: A. A. Physical signalling sublayer
Explanation: The portion of physical layer that interfaces with the medium access control sublayer is Physical Signaling Sublayer. The main function of this layer is character encoding, reception, decoding and performs optional isolation functions. It handles which media connection the signal should be forwarded to physically.

Correct Answer: D. D. All of the mentioned
Explanation: Anything dealing with a network cable or the standards in use – including pins, connectors and the electric current used is dealt in the physical layer (Layer 1). Physical layer deals with bit to bit delivery of the data aided by the various transmission mediums.

Correct Answer: C. C. Both start & stop signalling and flow control
Explanation: In asynchronous serial communication, the communication is not synchronized by clock signal. Instead of a start and stop signaling and flow control method is followed. Unlike asynchronous serial communication, in synchronous serial communication a clock signal is used for communication, so the start and stop method is not really required.

Correct Answer: D. D. All of the mentioned
Explanation: The physical layer is responsible for line coding, channel coding and modulation that is needed for the transmission of the information. The physical configuration including pins, connectors and the electric current used is dealt in the physical layer based on the requirement of the network application.

Correct Answer: A. A. Data link layer
Explanation: Physical layer accepts data or information from the data link layer and converts it into hardware specific operations so as to transfer the message through physical cables. Some examples of the cables used are optical fiber cables, twisted pair cables and co-axial cables.

Correct Answer: C. C. Multiplexing
Explanation: In communication and computer networks, the main goal is to share a scarce resource. This is done by multiplexing, where multiple analog or digital signals are combined into one signal over a shared medium. The multiple kinds of signals are designated by the transport layer which is the layer present on a higher level than the physical layer.

Correct Answer: D. D. All of the mentioned
Explanation: Wireless transmission is carried out by radio waves, microwaves and IR waves. These waves range from 3 Khz to above 300 Ghz and are more suitable for wireless transmission. Radio waves can penetrate through walls and are used in radio communications, microwaves and infrared (IR) waves cannot penetrate through walls and are used for satellite communications and device communications respectively.

Correct Answer: B. B. SMTP client
Explanation: SMTP clients are the entities that send mails to other mail servers. The SMTP servers cannot send independent mails to other SMTP servers as an SMTP server. There are no masters or peers in SMTP as it is based on the client-server architecture.